Tuesday, December 26, 2023

One Log Load

 


Thanks, Elmo!

8 comments:

  1. I remember seeing those when I was a kid. Not anymore.

    ReplyDelete
  2. In the little town in the foothills where I live there are some incense cedars that big or bigger and a 100ft or more tall.

    ReplyDelete
  3. So, . . . what connects the, "tractor" to the, "trailer" part of the setup, . . . is nothing more than a long, "telephone pole", with a kind of, "c" clamp"?!

    ReplyDelete
    Replies
    1. It's called the 'reach'. All it does is steer the dolly. The logs actually connect the truck to the tailer (the dolly) to form a semi-truck-trailer combination.

      Modern reaches are a 7" by 9" tube of steel. The old Doug Fir reaches were pretty notorious for breaking at the worst possible time, ie: when the truck was making a hard turn and there was a lot of stress on the reach. It usually lead to the trailer overturning or the truck going off the road. Or both. Not good.
      Modern steel reaches can still break, but with proper inspection and replacement it's a rare occurrence.

      The system is pretty ingenious, as it allows for the dolly to 'cheat' very little and permits the hauling of logs on some verry narrow, winding roads.

      Delete
  4. I am always impressed by the knowledge expressed on this blog, no matter the subject. Truly impressive. Hats off to you, gentlemen.

    ReplyDelete
  5. Thank you Elmo, great info. but I might add that the log, or is it now a pole? may have been the inspiration for Mossy Oak Camo.

    ReplyDelete
    Replies
    1. Or in this case, Mossy Spruce Camo :-)

      Delete