Tuesday, March 3, 2026

Now that's a selection!

 



Commission Earned

2 comments:

  1. A lot of these around. NONE call out whether they meet NAS807 or DIN 338 specs...so they don't. A good set will cost 500+. These are doubtless "M7" or "Cobalt" or whatever, but the real key to a good drill bit is the alloy, the heat treat, and the sharpening. Stick to Cleveland, PTD, etc if you want quality drills.

    ReplyDelete
  2. My first thought was "Holy Cow!"

    ReplyDelete