Monday, May 12, 2025

Thumper

 


12 comments:

  1. think I'd prefer firing that beast from the hip

    ReplyDelete
  2. You don’t actually load the rounds on the stock sleeve. You keep them there for extra mass to lessen the recoil.

    Drew458

    ReplyDelete
  3. So...this might be a naive question, but if those were loaded in the magazine tube, how does the pointy tips of those rounds keep from setting off the primers of the rounds in front of it? One might think that a sudden jolt, or dropping the rifle on the butt, or ever recoil might cause the tip of one round in the tube to set off the primer of the round just in front of it.

    ReplyDelete
    Replies
    1. Good eye; these have Hornady FTX polymer tipped bullets. They’re fairly soft and flex enough not to set off the round ahead of them in the magazine. The pointy shape dramatically improved the ballistics, too.

      Delete
    2. Great question. This is why tube-fed rifles use blunt-tipped bullets, unless they're modern polymer wonderbullets.

      Delete
  4. Henry made that, if the magazine loading port is any indication. Stainless steel and synthetic stock indicates bad weather resistance is anticipated.

    ReplyDelete
  5. Nice rifle. I got over the 45-70, decades ago. In these days of my simplification, I'll stick with either my compact 308 Ruger American or the Savage 99 in 308.

    ReplyDelete
  6. Make my Rossi .44 92 seem like a pea shooter, far lighter carbine though, got a trapper, tapered bbl, its under 6lbs with shells.

    ReplyDelete
  7. No comment on the pistol?

    ReplyDelete
    Replies
    1. Sorta Glock-ish, don't you think? If the rifle suggests bear country, maybe the pistol is in 10mm?

      Delete